2017 XDURO Cross 4.0 (low-step)

  • Equiped with the Bosch Performance CX which has been specially optimized for sporty use.

  • The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range



Are you looking for a sporty bike but prefer riding longer distances on- and off-road? If so, the XDURO trekking or cross-models are the right choice. These eBikes are designed specifically for long trips, whether for fun or for everyday life.


    Made of shock-resistant plastic, the light component protects effectively from scratches or motor damage.
    The Haibike SkidPlate

    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severely. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2013, a protection element which protects the bottom side of the motor.

    Bottom side protection

    Here the concept of a 'sacrifice part' applies: Similar to a helmet, the SkidPlate absorbs impact forces by deformation or destruction which would otherwise damage the significantly more expensive motor.

    The heart of the Haibike alu frame: light, highly robust and complex manufacturing with a special casting technique known from the motorcycle industry.
    The Haibike Gravity Casting Interface

    It is the heart of the frame: the motor interface. Here, many crucial functions such as motor mount, rocker and damper mount, as well as the interlocking battery and lower connection. A robust frame is based on a sturdy interface.

    Casting technique known from the motorcycle industry

    Therefore, since 2010, we use a casting technique which is known from the motorcycle industry, the so-called Gravity-Casting technique. In this process, negative forms made of compressed sand are placed in big forms. These sand forms are then filled with an alloy of alu and zinc and afterwards rotate in precisely calculated axes. Due to gravity, the alloy spreads evenly and results in an even casting thickness.

    Light, robust and precise

    Thanks to this procedure, extremely robust components can be produced which are then exposed to an extensive X-ray control in order to achieve the casting seal of approval. A subsequent, computer-controlled postprocessing ensures stable precision.

    Optimized for ePerformance bikes, the Bosch Performance CX motor was developed with a focus on creating a more sport oriented unit.
    Bosch Performance CX Drive Unit
    The Bosch Performance CX has been specially optimized for sporty use. The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range.

    The motor offers an impressive maximum torque of 75 Nm. The “Direct Flow” technique also guarantees powerful support in the lower cadence levels. Trail Control offers a dynamic power management system, that allows the rider to choose the optimum support level (50-300%) for the terrain they are riding, their riding style, and the distance they are looking to cover. “Shift detection” protects your chain by cutting off the torque from the motor during shifting for smooth gear changes.

    A computer and control element: the proven Bosch Intuvia display is easy to read and offers many functions and information to the rider.
    Bosch Intuvia Display
    The Intuvia display tells the rider: actual, average and maximum speed, day trip and total distance, the time, trip time and total operating time of the bike, and motor performance. The remote control is located on the left of the handlebars and all display features and support modes can be selected safely while driving without taking your hands off the handlebars. The stable display base ensures a secure fit even under tough conditions.

    An accurate range indicator displays how far the current charge level will last in mileage. From the remote, the five support modes (Off, Eco, Tour, eMTB/Sport, Turbo) can be selected or walk-assist can be activated. Display functions can be accessed even when removed from the bike. A micro-USB connector allows you to charge a navigation system, mobile phone, or MP3 player.


  • Frame Haibike aluminum 6061, hydroformed, Gravity Casting Interface, 27.5"
  • Fork SR Suntour NCX-E45 LOR Lockout, Air, Travel: 60mm
  • Sprocket Sram X-Sync, 18 teeth
  • Rear Derailleur Shimano Deore XT M8000, 11-speed
  • Cogset Shimano SLX M7000, 11-42 teeth
  • Front Hub Rims: Alexrims MD35/Hub: XLC Evo Disc
  • Rear Hub Rims: Alexrims MD35/Hub: XLC Evo Disc
  • Tires Schwalbe Super Moto X, 27.5"x2.40"
  • Brakes Magura MT4, 180/160mm
  • Handlebar Haibike components TheBar++, 740mm
  • Stem Haibike components The Stem++, A-Head stem
  • Seat Xduro Light MTB
  • Seat Post Haibike components The Seatpost++
  • Extras Skidplate
  • Motor Bosch Performance CX, 350W
  • Battery Bosch Powerpack 500Wh
  • Display Bosch Intuvia Display


    • Frame Size
    • Rider Height
    • Seat Tube Length
    • Seat Angle
    • Head Tube Length
    • Head Angle
    • Top Tube Length
    • Chain Stay Length
    • BB Drop
    • Wheel Base
    • Stack
    • Reach
    • Stand Over Height
    • 44 XS
    • 5'1" - 5'4"
    • 440 mm
    • 73 °
    • 140 mm
    • 70 °
    • 560 mm
    • 460 mm
    • -60 mm
    • 1079 mm
    • 647 mm
    • 362 mm
    • 0 mm
    • 48 S
    • 5'4" - 5'7"
    • 480 mm
    • 73 °
    • 150 mm
    • 70 °
    • 580 mm
    • 460 mm
    • -60 mm
    • 1099 mm
    • 657 mm
    • 379 mm
    • 0 mm
    • 52 M
    • 5'7"- 5'10"
    • 520 mm
    • 73 °
    • 160 mm
    • 70 °
    • 600 mm
    • 460 mm
    • -60 mm
    • 1120 mm
    • 666 mm
    • 396 mm
    • 0 mm
    • 56 L
    • 5'10" - 6'1"
    • 560 mm
    • 73 °
    • 170 mm
    • 70 °
    • 620 mm
    • 460 mm
    • -60 mm
    • 1140 mm
    • 675 mm
    • 413 mm
    • 0 mm

Customer Reviews

Be the first to review this product

Add your review

Write Your Own Review

You're reviewing: 2017 XDURO Cross 4.0 (low-step)

How do you rate this product? *

1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Overall Quality