2017 XDURO FullLife 5.0

Regular Price: $2,999.99

Special Price $2,799.99



  • Equiped with the Bosch Performance CX which has been specially optimized for sporty use.

  • The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range

* Required Fields

Regular Price: $2,999.99

Special Price $2,799.99

  • Rider height: 5'7" - 5'10"
  • Rider height: 5'10" - 6'1"

description

Details

Designed and built for women, without any compromises in power or performance. The FullLife features 120mm of plush travel via the SR Suntour Aion LO-R fork and SR Suntour Unair LO-R rear shock. Precision shifting is handled by the SRAM NX 11 speed drivetrain while braking is handled by the Magura MT4 hydraulic brakes. This combination offers comfort and control over any terrain. Power is provided by the powerful Bosch Performance CX motor and 500Wh battery pack.

Technology

    Made of shock-resistant plastic, the light component protects effectively from scratches or motor damage.
    The Haibike SkidPlate

    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severely. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2013, a protection element which protects the bottom side of the motor.

    Bottom side protection

    Here the concept of a 'sacrifice part' applies: Similar to a helmet, the SkidPlate absorbs impact forces by deformation or destruction which would otherwise damage the significantly more expensive motor.

    A perfect, sensitive chassis, free of any drive unit influence, made by Haibike.
    The Haibike SES System
    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severly. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2012, a protection element which protects the bottom side of the motor.

    Bosch motors pose two challenges for engineers at once when developing an efficient chassis: its construction size and its relatively small sprocket. Usually, the chainstay bearing has to be installed close to the point of contact between chain and sprocket. Due to the small size, this would result in the bearing running directly through the motor which is, of course, impossible. Therefore, we created a simple but efficient concept: the Haibike Sprocket Equalizing System (S.E.S).


    For a perfect chassis

    First of all, we move the chainstay bearing up. Thus, we achieve an optimized wheel lifting effect (the bike moves away from the obstacle) on the one hand, and on the other a short wheelbase (as the bearing point is not located between motor and rear wheel).


    A pulley prevents influences on the drive unit

    In order to avoid the inevitable influence of the chassis on the chain during suspension, we axially place the pulley directly on the chainstay. Additionally, we integrated a chain guiding on the pulley. Together with the chain guiding on the Haibike sprocket, a chain drop is almost impossible.

    The heart of the Haibike alu frame: light, highly robust and complex manufacturing with a special casting technique known from the motorcycle industry.
    The Haibike Gravity Casting Interface

    It is the heart of the frame: the motor interface. Here, many crucial functions such as motor mount, rocker and damper mount, as well as the interlocking battery and lower connection. A robust frame is based on a sturdy interface.

    Casting technique known from the motorcycle industry

    Therefore, since 2010, we use a casting technique which is known from the motorcycle industry, the so-called Gravity-Casting technique. In this process, negative forms made of compressed sand are placed in big forms. These sand forms are then filled with an alloy of alu and zinc and afterwards rotate in precisely calculated axes. Due to gravity, the alloy spreads evenly and results in an even casting thickness.



    Light, robust and precise

    Thanks to this procedure, extremely robust components can be produced which are then exposed to an extensive X-ray control in order to achieve the casting seal of approval. A subsequent, computer-controlled postprocessing ensures stable precision.

    The reliable and proven Performance Speed drive unit from market leader Bosch. 350 watts of power support riders up to 45 km/h.
    Bosch Performance Speed Drive Unit
    The Performance Speed drive unit is a powerful and reliable S-Pedelec drive system built for fast eBikes. With 350 watts of power it supports the rider up to 45 km/h.

    The advanced 3-sensor system detects torque, cadence and speed 1,000 times per second and sends the information to a powerful processor in almost real time. This extremely fast and precise motor control of the Bosch drive ensures accurate and timely responses while you’re riding.

    A computer and control element: the proven Bosch Intuvia display is easy to read and offers many functions and information to the rider.
    Bosch Intuvia Display
    The Intuvia display tells the rider: actual, average and maximum speed, day trip and total distance, the time, trip time and total operating time of the bike, and motor performance. The remote control is located on the left of the handlebars and all display features and support modes can be selected safely while driving without taking your hands off the handlebars. The stable display base ensures a secure fit even under tough conditions.

    An accurate range indicator displays how far the current charge level will last in mileage. From the remote, the five support modes (Off, Eco, Tour, eMTB/Sport, Turbo) can be selected or walk-assist can be activated. Display functions can be accessed even when removed from the bike. A micro-USB connector allows you to charge a navigation system, mobile phone, or MP3 player.

Specifications

  • Frame Haibike aluminum 6061, hydroformed, Gravity Casting Interface, 27.5", 120mm
  • Rear Shock SR Suntour Unair LO-R, Air
  • Fork SR Suntour Aion LO-R, Air, Travel: 120mm
  • Sprocket Sram X-Sync, 18 teeth
  • Rear Derailleur Sram NX, 11-speed
  • Cogset Sram PG1130, 11-42 teeth
  • Front Hub Rims: Alexrims MD23/Hub: XLC Evo Disc
  • Rear Hub Rims: Alexrims MD23/Hub: XLC Evo Disc
  • Tires Schwalbe Nobby Nic Performance, 27.5"x2.35"
  • Brakes Magura MT4, 203/180mm
  • Handlebar Haibike components TheBar++, 740mm
  • Stem Haibike components The Stem++, A-Head stem
  • Seat Xduro Light MTB
  • Seat Post Haibike components The Seatpost++
  • Extras Skidplate
  • Motor Bosch Performance CX, 350W
  • Battery Bosch Powerpack 500Wh
  • Display Bosch Intuvia Display
  • Weight 49lbs

Geometry

    • Frame Size
    • Rider Height
    • Seat Tube Length
    • Seat Angle
    • Head Tube Length
    • Head Angle
    • Top Tube Length
    • Chain Stay Length
    • BB Drop
    • Wheel Base
    • Stack
    • Reach
    • Stand Over Height
    • 45 M
    • 5'7" - 5'10"
    • 450 mm
    • 73 °
    • 125 mm
    • 69 °
    • 580 mm
    • 465 mm
    • -20 mm
    • 1129 mm
    • 598 mm
    • 397 mm
    • 0 mm
    • 50 L
    • 5'10" - 6'1"
    • 500 mm
    • 73 °
    • 130 mm
    • 69 °
    • 600 mm
    • 465 mm
    • -20 mm
    • 1149 mm
    • 602 mm
    • 416 mm
    • 0 mm

Customer Reviews
Reviews

Be the first to review this product

Add your review

Write Your Own Review

You're reviewing: 2017 XDURO FullLife 5.0

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Overall Quality