2018 SDURO FullSeven 9.0
$5,699.99


  • Equiped with the Bosch Performance CX which has been specially optimized for sporty use.

  • The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range

* Required Fields

$5,699.99
  • Rider height: 5'4" - 5'7"
  • Rider height: 5'7"- 5'10"
  • Rider height: 5'10" - 6'1"
  • Rider height: 6'1" - 6'4"

description

Details

The legendary SDURO FullSeven series offers a wide range of ePerformance models with suspension travel of up to 120 mm for light to medium terrain. The FullSeven comes with 27.5" wheels which are offered with standard or plus tire widths for superb traction and added comfort over rough surfaces.

Technology

    Made of shock-resistant plastic, the light component protects effectively from scratches or motor damage.
    The Haibike SkidPlate

    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severely. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2013, a protection element which protects the bottom side of the motor.

    Bottom side protection

    Here the concept of a 'sacrifice part' applies: Similar to a helmet, the SkidPlate absorbs impact forces by deformation or destruction which would otherwise damage the significantly more expensive motor.

    A perfect, sensitive chassis, free of any drive unit influence, made by Haibike.
    The Haibike SES System
    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severly. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2012, a protection element which protects the bottom side of the motor.

    Bosch motors pose two challenges for engineers at once when developing an efficient chassis: its construction size and its relatively small sprocket. Usually, the chainstay bearing has to be installed close to the point of contact between chain and sprocket. Due to the small size, this would result in the bearing running directly through the motor which is, of course, impossible. Therefore, we created a simple but efficient concept: the Haibike Sprocket Equalizing System (S.E.S).


    For a perfect chassis

    First of all, we move the chainstay bearing up. Thus, we achieve an optimized wheel lifting effect (the bike moves away from the obstacle) on the one hand, and on the other a short wheelbase (as the bearing point is not located between motor and rear wheel).


    A pulley prevents influences on the drive unit

    In order to avoid the inevitable influence of the chassis on the chain during suspension, we axially place the pulley directly on the chainstay. Additionally, we integrated a chain guiding on the pulley. Together with the chain guiding on the Haibike sprocket, a chain drop is almost impossible.

    The new Bosch PowerTube battery enables a high integration, a beautiful shape and functionality. It is available in many of our models.
    The Haibike Intube Battery Concept (IBC)

    The new Bosch PowerTube battery enables a high integration, a beautiful shape and functionality. It is available in many of our models.

    The ModularRailSystem allows simple and fast mounting of different equipment on the bike.
    The Modular Rail System (MRS)

    Our patent MRS allows the quick and simple mounting of different equipment on the bike.

    A mounting rail is integrated in the upper part of the downtube. You can thus mount for instance bottle cages or bags freely on the bike. Hence, you have all items you need during a ride close at hand. We use a magnetic mounting system provided by FidLock which offers safe hold, easy handling and due to its minimalistic design, you can also use it in very small-framed bikes.



    Perfect for long tours:

    It only takes a few steps to mount an additional battery (TheRangeExtender) and thus you can reach a significantly higher distance.

    The heart of the Haibike alu frame: light, highly robust and complex manufacturing with a special casting technique known from the motorcycle industry.
    The Haibike Gravity Casting Interface

    It is the heart of the frame: the motor interface. Here, many crucial functions such as motor mount, rocker and damper mount, as well as the interlocking battery and lower connection. A robust frame is based on a sturdy interface.

    Casting technique known from the motorcycle industry

    Therefore, since 2010, we use a casting technique which is known from the motorcycle industry, the so-called Gravity-Casting technique. In this process, negative forms made of compressed sand are placed in big forms. These sand forms are then filled with an alloy of alu and zinc and afterwards rotate in precisely calculated axes. Due to gravity, the alloy spreads evenly and results in an even casting thickness.



    Light, robust and precise

    Thanks to this procedure, extremely robust components can be produced which are then exposed to an extensive X-ray control in order to achieve the casting seal of approval. A subsequent, computer-controlled postprocessing ensures stable precision.

    We developed this component especially for the Bosch driven models for a perfect, wear-optimized force transmission from motor to the chain.
    The Haibike Sprocket
    Bosch Performance CX drive has a significantly smaller sprocket compared to classical chainrings and rotates 2.5 times faster than the revolution of the crank. This causes less teeth to transmit more force.

    Custom sprocket

    Many of our models with Bosch drive unit come with a specially developed Haibike sprocket. Each sprocket is milled out of a solid block by a computer-controlled milling machine (CNC). The special shape of the teeth ensures 100% contact to the chain, thus guaranteeing a long life for both the chain and the sprocket. Together with the integrated chainring guide on the sprocket and the chain guard on the pulley wheel, chain jack is nearly impossible.

    Small, compact and well protected: the new Bosch Purion. Despite the small size of the remote, the display provides all of the important features and information.
    Bosch Purion Display
    The new compact display is a combination of remote control and display. Positioned on the left of the handlebars, the display provides key information through a small, easy to read display. Its compactness and location make it ideal for extreme ePerformance bikes whose riders seek a display that is reduced to the essentials and well-protected.

    All the main functions can be directly controlled: support level (Off, Eco, Tour, eMTB/Sport, Turbo), switching on and off the eBike light, walk-assist, the current speed, the day trip and the total mileage of the bike, and the range, or how far the current charge level of the battery will last in mileage. A backlight in the display makes all information easy to read even in the dark.

    Optimized for ePerformance bikes, the Bosch Performance CX motor was developed with a focus on creating a more sport oriented unit.
    Bosch Performance CX Drive Unit
    The Bosch Performance CX has been specially optimized for sporty use. The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range.

    The motor offers an impressive maximum torque of 75 Nm. The “Direct Flow” technique also guarantees powerful support in the lower cadence levels. Trail Control offers a dynamic power management system, that allows the rider to choose the optimum support level (50-300%) for the terrain they are riding, their riding style, and the distance they are looking to cover. “Shift detection” protects your chain by cutting off the torque from the motor during shifting for smooth gear changes.

Specifications

  • Frame Aluminium 6061, thru-axle M12 (1.75) x 148mm, disc brake Post Mount, Travel: 120mm
  • Rear Shock RockShox Monarch RT, air
  • Fork RockShox Revelation RC Lockout, air, Travel: 120mm, aluminium steerer tube 1 1/8" - 1 1/2" tapered, thru-axle Boost
  • Headset A-Head Tapered
  • Sprocket steel, Haibike CNC sprocket black, plus, 16
  • Rear Derailleur Shimano Deore XT M8000, 11-speed
  • Shifter Shimano Deore XT M8000, rapidfire
  • Cogset Shimano SLX M7000, 11-46 teeth
  • Chain Shimano HG601
  • Front Hub DT Swiss H1900
  • Rear Hub DT Swiss H1900
  • Rims DT Swiss H1900
  • Tires Schwalbe Nobby Nic Evo SnakeSkin, 70-584
  • Brakes Magura MT5, 203mm / Magura MT4, 180mm
  • Brake Levers Magura MT54 HC-lever, aluminium
  • Pedals XLC Freeride, Plattform Pedal
  • Handlebar Haibike Components TheBar ++ 740mm
  • Grips Haibike MTB Griffe
  • Stem Haibike Components TheStem ++, A-head, Bar bore: 31.8mm, 6°
  • Seat Selle Royal Rampage
  • Seat Post XLC AllMtn, Remote, telescope, 31.6mm
  • Charger Bosch quick charger 4A
  • Motor Bosch Performance CX, 350W
  • Battery Bosch PowerTube 500
  • Display Bosch Purion

Geometry

2018 SDURO FullSeven 9.0
    • Frame Size
    • Rider Height
    • Seat Tube Length
    • Seat Angle
    • Head Tube Length
    • Head Angle
    • Top Tube Length
    • Chain Stay Length
    • BB Drop
    • Wheel Base
    • Stack
    • Reach
    • Stand Over Height
    • 40 S
    • 5'4" - 5'7"
    • 400mm
    • 73°
    • 120mm
    • 67°
    • 580mm
    • 470mm
    • -20mm
    • 1168mm
    • 598mm
    • 397mm
    • 0 mm
    • 44 M
    • 5'7"- 5'10"
    • 450 mm
    • 73 °
    • 125 mm
    • 67 °
    • 600 mm
    • 470 mm
    • -20 mm
    • 1188 mm
    • 603 mm
    • 416 mm
    • 0 mm
    • 48 L
    • 5'10" - 6'1"
    • 500 mm
    • 73 °
    • 130 mm
    • 67 °
    • 620 mm
    • 470 mm
    • -20 mm
    • 1209 mm
    • 608 mm
    • 434 mm
    • 0 mm
    • 52 XL
    • 6'1" - 6'4"
    • 550 mm
    • 73 °
    • 640 mm
    • 67 °
    • 135 mm
    • 470 mm
    • -20 mm
    • 1229 mm
    • 612 mm
    • 453 mm
    • 0 mm

Customer Reviews
Reviews

Be the first to review this product

Add your review

Write Your Own Review

You're reviewing: 2018 SDURO FullSeven 9.0

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Overall Quality