2018 SDURO FullSeven LT 7.5
$4,799.99


  • Equiped with the Bosch Performance CX which has been specially optimized for sporty use.

  • The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range

* Required Fields

$4,799.99
  • Rider height: 5'4" - 5'7"
  • Rider height: 5'7"- 5'10"
  • Rider height: 5'10" - 6'1"
  • Rider height: 6'1" - 6'4"

description

Details

For 2018 we have introduced a new model in our lineup, the ultra-versatile 150 mm FullSeven LT (Long Travel) model which gives you the ability to safely and comfortably tackle more terrain than ever.

Technology

    Made of shock-resistant plastic, the light component protects effectively from scratches or motor damage.
    The Haibike SkidPlate

    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severely. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2013, a protection element which protects the bottom side of the motor.

    Bottom side protection

    Here the concept of a 'sacrifice part' applies: Similar to a helmet, the SkidPlate absorbs impact forces by deformation or destruction which would otherwise damage the significantly more expensive motor.

    A perfect, sensitive chassis, free of any drive unit influence, made by Haibike.
    The Haibike SES System
    Especially eMTBs often suffer from impacts or stone chipping which damage the low-situated motor severly. Therefore, we were the first manufacturer to introduce the SkidPlate back in 2012, a protection element which protects the bottom side of the motor.

    Bosch motors pose two challenges for engineers at once when developing an efficient chassis: its construction size and its relatively small sprocket. Usually, the chainstay bearing has to be installed close to the point of contact between chain and sprocket. Due to the small size, this would result in the bearing running directly through the motor which is, of course, impossible. Therefore, we created a simple but efficient concept: the Haibike Sprocket Equalizing System (S.E.S).


    For a perfect chassis

    First of all, we move the chainstay bearing up. Thus, we achieve an optimized wheel lifting effect (the bike moves away from the obstacle) on the one hand, and on the other a short wheelbase (as the bearing point is not located between motor and rear wheel).


    A pulley prevents influences on the drive unit

    In order to avoid the inevitable influence of the chassis on the chain during suspension, we axially place the pulley directly on the chainstay. Additionally, we integrated a chain guiding on the pulley. Together with the chain guiding on the Haibike sprocket, a chain drop is almost impossible.

    The heart of the Haibike alu frame: light, highly robust and complex manufacturing with a special casting technique known from the motorcycle industry.
    The Haibike Gravity Casting Interface

    It is the heart of the frame: the motor interface. Here, many crucial functions such as motor mount, rocker and damper mount, as well as the interlocking battery and lower connection. A robust frame is based on a sturdy interface.

    Casting technique known from the motorcycle industry

    Therefore, since 2010, we use a casting technique which is known from the motorcycle industry, the so-called Gravity-Casting technique. In this process, negative forms made of compressed sand are placed in big forms. These sand forms are then filled with an alloy of alu and zinc and afterwards rotate in precisely calculated axes. Due to gravity, the alloy spreads evenly and results in an even casting thickness.



    Light, robust and precise

    Thanks to this procedure, extremely robust components can be produced which are then exposed to an extensive X-ray control in order to achieve the casting seal of approval. A subsequent, computer-controlled postprocessing ensures stable precision.

    Small, compact and well protected: the new Bosch Purion. Despite the small size of the remote, the display provides all of the important features and information.
    Bosch Purion Display
    The new compact display is a combination of remote control and display. Positioned on the left of the handlebars, the display provides key information through a small, easy to read display. Its compactness and location make it ideal for extreme ePerformance bikes whose riders seek a display that is reduced to the essentials and well-protected.

    All the main functions can be directly controlled: support level (Off, Eco, Tour, eMTB/Sport, Turbo), switching on and off the eBike light, walk-assist, the current speed, the day trip and the total mileage of the bike, and the range, or how far the current charge level of the battery will last in mileage. A backlight in the display makes all information easy to read even in the dark.

    Optimized for ePerformance bikes, the Bosch Performance CX motor was developed with a focus on creating a more sport oriented unit.
    Bosch Performance CX Drive Unit
    The Bosch Performance CX has been specially optimized for sporty use. The motor delivers a constant maximum torque of up to 75 Nm up even to a high speed range.

    The motor offers an impressive maximum torque of 75 Nm. The “Direct Flow” technique also guarantees powerful support in the lower cadence levels. Trail Control offers a dynamic power management system, that allows the rider to choose the optimum support level (50-300%) for the terrain they are riding, their riding style, and the distance they are looking to cover. “Shift detection” protects your chain by cutting off the torque from the motor during shifting for smooth gear changes.

Specifications

  • Frame Aluminum 6061, Gravity Casting, hydroformed, thru-axle M12 (1.75) x 148mm, disc brake Post Mount, Travel: 150mm
  • Rear Shock RockShox Monarch RT, air
  • Fork SR Suntour Aion 35 LO-R Lockout, air, Travel: 150mm, aluminium steerer tube 1 1/8" - 1 1/2" tapered, thru-axle Boost
  • Headset A-Head Tapered
  • Sprocket steel, Haibike CNC sprocket black, plus, 16
  • Rear Derailleur Sram NX, 11-speed
  • Shifter Sram NX, trigger switch
  • Cogset Sram PG1130, 11-42 teeth
  • Chain Sram PC1110
  • Front Hub Haibike Components TheHub ++
  • Rear Hub Haibike Components TheHub ++
  • Spokes black, black
  • Rims Alexrims MD35, aluminum
  • Tires Schwalbe Nobby Nic Evo SnakeSkin, 70-584
  • Brakes Magura MT5, 203mm / Magura MT5, 180mm
  • Brake Levers Magura MT54 HC-lever, aluminum
  • Pedals MTB Plattformpedal aluminum
  • Handlebar Haibike Components TheBar ++ 780mm
  • Grips Haibike MTB Griffe
  • Stem Haibike Components TheStem ++, A-head, Bar bore: 31.8mm, 6°
  • Seat Selle Royal Verve
  • Seat Post XLC AllMtn, Remote, telescope, 31.6mm
  • Charger Bosch quick charger 4A
  • Motor Bosch Performance CX, 350W
  • Battery Bosch PowerPack 500
  • Display Bosch Purion

Geometry

2018 SDURO FullSeven LT 7.5
    • Frame Size
    • Rider Height
    • Seat Tube Length
    • Seat Angle
    • Head Tube Length
    • Head Angle
    • Top Tube Length
    • Chain Stay Length
    • BB Drop
    • Wheel Base
    • Stack
    • Reach
    • Stand Over Height
    • 42 S
    • 5'4" - 5'7"
    • 420 mm
    • 73 °
    • 120 mm
    • 67 °
    • 580 mm
    • 465 mm
    • 0 mm
    • 1172 mm
    • 606 mm
    • 395 mm
    • 0 mm
    • 46 M
    • 5'7"- 5'10"
    • 460 mm
    • 73 °
    • 125 mm
    • 67 °
    • 600 mm
    • 465 mm
    • 0 mm
    • 1193 mm
    • 611 mm
    • 413 mm
    • 0 mm
    • 50 L
    • 5'10" - 6'1"
    • 500 mm
    • 73 °
    • 130 mm
    • 67 °
    • 620 mm
    • 465 mm
    • 0 mm
    • 1213 mm
    • 615 mm
    • 432 mm
    • 0 mm
    • 54 XL
    • 6'1" - 6'4"
    • 540 mm
    • 73 °
    • 640 mm
    • 67 °
    • 135 mm
    • 465 mm
    • 0 mm
    • 1234 mm
    • 620 mm
    • 451 mm
    • 0 mm

Awards & Tests

Customer Reviews
Reviews

Be the first to review this product

Add your review

Write Your Own Review

You're reviewing: 2018 SDURO FullSeven LT 7.5

How do you rate this product? *

 
1 1 star
2 2 star
3 3 star
4 4 star
5 5 star
Overall Quality